{$cfg_webname}
主页 > 机械机电 > 机械 >

液压钻动力头结构设计

来源:wenku168.com  资料编号:WK1683139 资料等级:★★★★★ %E8%B5%84%E6%96%99%E7%BC%96%E5%8F%B7%EF%BC%9AWK1683139
资料介绍

摘    要
液压钻动力头是采用液压驱动、 长进给行程的动力式钻机。着重介绍了该钻机的结构特点、主要技术参数、动力头机构组成、动力传动方案、动力头回转机构、进给机构和液压控制系统的设计等。文章叙述了液压钻动力头的结构及工作原理,并对液压钻动力头的主要参数选择和设计计算做了详细的介绍。液压钻动力头是国内最新开发的新系列组合机床通用部件。自成独立加工单元,用以完成对铸铁、钢及有色金属件钻孔、钻深孔。其主要特点是结构紧凑,替代了过去钻削头与滑台组合的加工单元。可配置成回转工作台式组合机床或直线式小型组合机床自动线等,应用广泛。

关键词:钻; 动力头;液压

ABSTRACT
The hydraulic pressure drills, power head is a kind of power type drilling machine which uses the hydraulic pressure actuation to progress for the traveling schedule. This aiticle introduces this drilling machine's unique feature emphatically、major technique parameter、power head organization composition、power drive plan、power head swiveling mechanism、advanced gear and hydraulic control system's design and so on. The article narrates the hydraulic pressure drill and power head's structure and principle of work, and gives a detailed introduction of the main parameter choice and the design calculation of the hydraulic pressure. The hydraulic pressure drills power head is the newest development of new series aggregate machine-tool general part in our nation. It has an independent processing unit, to drill deep holes in the cast iron, the steel and the non-ferrous metal. Its main feature is that the structure is compact, and it substitutes the past way to drill with truncates and the sliding table combination processing unit. It can be disposed as the rotation work table model aggregate machine-tool or the orthoscopic small aggregate machine-tool from the generatrix and so on, and it is widely used

Key words:Drilling, Power head, Hydraulic pressure

液压钻动力机构简介
本次设计以Z3040为原型,加以技术改造,实现液压控制驱动,结构简单,功能齐全,拟采用以下结构:
(1)钻机由液压动力站、控制台、钻机本体、动力头等部分组成,单杆长行程油缸给进,液压驱动及控制;
(2)液压系统采用轴向柱塞变量泵,与该泵相配的手动无级变速恒功率输出机构设计独特,无需变速箱即可实现大速比、大扭矩调节功能;
(3)采用的长行程伸缩式油缸给进装置,实现起下钻,有效降低了钻机桅杆高度,增强了钻机稳定性;
(4)钻机可以采用车载和车装模式,亦可为模块化结构(散装式)。

传动机构的设计计算
设计技术指标:
1.最大进给行程240mm;
2.. 空进给速度8m/min;
4. 进给位置精度0.15mm;
5.钻头转速 150—2800rpm

液压钻动力头结构设计
液压钻动力头结构设计
液压钻动力头结构设计
液压钻动力头结构设计
液压钻动力头结构设计


目   录    15000字 
中文摘要    Ⅰ
ABSTRACT    Ⅱ
1绪论    1
  1.1 课题的目的和意义    1
  1.2国内外液压技术发展分析比较    1
1.3液压钻动力头钻机优点    3
1.4液压钻动力机构简介    3
1.5动力头、进给运动及主轴    4
    2传动机构的设计计算    4
  2.1主轴的选择计算    5
      2.1.1轴的材料    5
2.1.2轴结构设计    5
2.1.3轴强度的校核计算    6
2.2电动机的选择    7
   2.2.1选择电动机的类型和结构形式    7
      2.2.2确定电动机的容量    8
      2.2.3确定电动机的转速    8
2.3联轴器的选择    9
2.3.1联轴器的分类和特点    9
2.3.2联轴器的选用计算    10
2.4键的选择    10
    2.4.1键的类型    10
     2.4.2键的选择    10
2.5花键的选择    10
     2.5.1花键的类型    11
    2.5.2矩形花键    11
     2.5.3花键的挤压强度校核    11
3液压控制系统设计    11
3.1液压系统的组成    11
   3.2液压系统的类型及特点    12
3.3液压系统原理图的设计    13
2.5.1液压控制系统动力源的基本类型    13
     2.5.2执行元件    13
      2.5.3绘制液压系统原理图    14
4液压元件及参数设计    16
   4.1 液压系统的主要    19
4.1.1初选系统工作压力    19
   4.2液压缸主要尺寸的计算和选择    19
      4.2.1计算液压缸的主要尺寸    19
      4.2.2液压缸的选择    20
     4.2.3液压缸流量计算    22
4.3液压泵    22
      4.3.1液压泵的分类和用途    22
      4.3.2液压泵的选择    22
5 结论    24
致谢    25
参考文献    26
含任务书 开题报告
 

推荐资料