{$cfg_webname}
主页 > 机械机电 > 电气 >

无缝钢管减径机上位机监控系统设计(新品)

来源:wenku168.com  资料编号:WK1683937 资料等级:★★★★★ %E8%B5%84%E6%96%99%E7%BC%96%E5%8F%B7%EF%BC%9AWK1683937
资料介绍

摘要
随着计算机技术的发展以及工业自动化水平的不断提高,利用计算机技术对生产进行管理以及对生产过程实施数据采集和监控,越来越受到人们的关注。
本文首先介绍了无缝钢管、无缝钢管生产线、减径机以及工业监控系统;然后介绍了组态软件的特点、构成以及各种组态软件的对比,和Win cc的优点、特征;最后详细叙述了利用Siemens公司的WinCC组态软件对无缝钢管生产中的减径机、冷床部分进行监控的设计,截取了主要监控画面并加以说明。
该设计的特点是故障响应快,操作简单,组态画面丰富等,减少了工人的劳动强度,保证了无缝钢管生产的连续性,大大提高了生产效率。
关键词:无缝钢管,减径机,组态软件,Win cc,监控系统

Abstract
With the development of computer technology and continual promotion of factory automation,more and more attention is paid to administration of factory information and data collection and monitor during industrial producing by means of computer technology. 
This article first introduced the seamless steel pipe, the seamless steel pipe production line, reduces the diameter machine as well as the industry supervisory system; Then introduced the configuration software's characteristic, the constitution as well as each kind of configuration software's contrast, with Win cc merit, characteristic; Finally narrated in detail has used Siemens Corporation's WinCC configuration software to reduce the diameter machine to the seamless steel pipe production, the cold-frame part to carry on the monitoring the design, has intercepted the main monitoring picture and explained.
This design's characteristic is the breakdown responds quickly, simplicity of operator, configuration picture rich and so on, reduced worker's labor intensity, had guaranteed the seamless steel pipe produces the continuity, raised the production efficiency greatly.
Keywords: Seamless steel pipe; Reduces the diameter machine ;Configuration; Win cc; Monitoring system

无缝钢管减径机上位机监控系统设计
无缝钢管减径机上位机监控系统设计
无缝钢管减径机上位机监控系统设计
无缝钢管减径机上位机监控系统设计


目   录     23000字
第1章、绪论    1
1.1无缝钢管及无缝钢管生产线简介 1
    1.1.1无缝钢管生产制造方法简介 1
    1.1.2无缝钢管用途  2
    1.1.3无缝钢管种类  2
    1.1.4无缝钢管物理性能检测  2
1.2无缝钢管生产线简介  2
    1.2.1热轧无缝钢管  2
    1.2.2冷轧无缝钢管  3
    1.2.3无缝钢管生产线各部分介绍  3
1.3减径机简介  6
1.4冷床简介  6
1.5工业监控系统  7
1.6课题研究的目的和意义  8
第2章、组态软件  9
2.1组态软件概述  9
2.2监控组态软件特点  9
2.3组态软件构成  10
2.4常用组态软件对比介绍  11
2.5组态软件的功能特点发展方向  13
2.6组态软件与监控系统的关系  16
第3章、西门子Win cc介绍  18
3.1西门子Win cc概述  18
3.2 Win cc系统概览   23
3.3 Win cc优点  24
3.4 Win cc的特征  25
3.5 Win cc 系统功能  25
第4章   监控系统的实现  28
     4.1减径机监控系统构成  28
     4.2 Win cc 实现监控系统的过程设计  28
4.2.1概述  29
4.2.2对安装Win cc系统的基本要求  29
4.2.3 Win cc与PLC通讯系统的设计  29
4.2.4监控画面的设计  31
4.2.5过程值归档组态  34
4.2.6报警组态  41
      4.2.7用户权限管理    42
第5章   结束语 43

本设计通过对无缝钢管生产的了解,以及对各种组态软件的分析,采用了目前市场最先进,工业监控最常用的组态软件Win CC,实现了对无缝钢管生产线中减径机和冷床部分的监控,监控画面简洁明了,可以清楚地反应出生产线上各个机组的运行情况,使工作人员对机组的运行情况有了更清楚地掌控,便于及时发现故障,排除故障,降低了整个生产线操作故障率与操作工地劳动强度,大大的提高了生产效率。

参考文献:
[1] 刘涛编.《最新无缝钢管生产新工艺新技术与质量控制检验实用手册》[M].北方工业出版社,2006.
[2]殷国茂.中国钢管50年[M].成都:四川科技出版社.
[3]马国华.监控组态软件及其应用[M].北京:清华大学出版社2001.
[4]葛波,沈文杰.工控组态软件的对比及应用[J].计算机测量与控制2002,10.
[5]谢军.工控组态软件的功能与分析.交通与计算机[J].2000年第18卷第3期:14-17.
[6]赵阳.西门子S7-300PLC及工控组态软件Win CC的应用.2006(6).
[7] 苏昆哲.深入浅出西门子WinCC V6.0版[M].北京:北京航空航天大学出版社,2004.
[8]SIEMENS WinCC Manual[Z].2005.
[9]Siemens AG .wincc SIMATIC WinCC 系统描述.
[10]S7-300/400PLC应用技术[M].北京:机械工业出版社,2005.
[11]王晓远.工业组态软件WinCC在雨水泵站监控系统中的应用[J].中国农村水利水电,2006年第12期:85-87.
[12]Win CC在天津无缝ASSEL轧管机监控系统中的应用[D].刘新奎,周华,梁慧杰,李星星,天津:天津无缝钢管厂,2007.

推荐资料