{$cfg_webname}
主页 > 机械机电 > 电气 >

10kV箱式(组合式)变电站设计(新品)

来源:wenku168.com  资料编号:WK1683935 资料等级:★★★★★ %E8%B5%84%E6%96%99%E7%BC%96%E5%8F%B7%EF%BC%9AWK1683935
资料介绍

摘 要
箱式变电站又称户外成套变电站,也有称做组合式变电站,它是发展于20世纪60年代至70年代欧美等西方发达国家推出的一种户外成套变电所的新型变电设备,由于它具有组合灵活,便于运输、迁移、安装方便,施工周期短、运行费用低、无污染、免维护等优点,受到世界各国电力工作者的重视。进入20世纪90年代中期,国内开始出现简易箱式变电站,并得到了迅速发展。
本课题的主要内容包括箱式变电站的发展应用,箱式变电站的结构分类,以及箱式变电站一次系统设计及其设备选型,二次系统设计,以及箱式变电站的智能监控系统。
关键词:箱式变电站  结构  一次系统  二次系统

Design of 10kV box-type transformer substation
ABSTRACT
   Box-type transformer substation calls again outdoor a transformer substation, also call to do the sectional transformer substation. It is a development to wait to 70's Europe and America western prosper in the 60's of 20 centuries the nation release a kind of outdoor the set changes to give or get an electric shock of new change to give or get an electric shock the equipments, because it have the combination vivid, easy to conveyance, move, install convenience, start construction the period is short and circulate the expenses low, free from pollution, do not need maintenance etc. advantage, suffer the international community  electric power the worker values. Enter the middle of 90's of 20 centuries. The domestic starts appearing the simple box-type transformer substation , and got the quick development.
The article regard box-type transformer substation as a development for relating box-type transformer substation  applied, the construction of  box-type transformer substation divides into se-section, emphasizing the treatise box-type transformer substation a the very equipments in design in subsystem chooses the type, two subsystems design, and the intelligence of box-type transformer substation supervises and control the system.
Keywords:box-type transformer substation  construction  first system  second system.

目录   19000字
摘要    Ⅲ
Abstract    Ⅳ
第1章  概述    1
第2章  电气主接线的方案设计     4
2.1  电气主接线介绍     4
2.1.1  电气主接线的概念     4
2.1.2  电气主接线的设计原则     4
2.1.3  电气主接线的方式     4
2.2 主接线的设计要求     5
2.2.1  主接线的设计依据     5
2.2.2  主接线设计的基本要求     6
2.3  电气主接线方案拟定     7
2.3.1  主变压器的选择     7
2.3.2  主变压器的确定     8
2.3.3  主接线方案的拟定     8
第3章  短路电流的计算     16
3.1  短路电流介绍     16
3.1.1  简单系统 的计算     18
3.1.2  复杂系统的计算     18
3.1.3  短路种类     19
3.2  短路计算     19
3.2.1  短路计算    19
3.2.2  不对称短路计算    22
第4章 电气设备的选择     26
4.1  电路选择的一般条件     26
4.1.1  按正常工作条件选择电器     26
4.1.2  按短路情况校验     26
4.2  高压断路器和隔离开关的选择     27
4.3  电流互感器的选择     30
4.3.1  lcw-220型电流互感器     30
4.3.2  选择二次导线连接的截面     30
4.3.3  动稳定和热稳定校验     31
4.4  电压互感器的选择     32
4.4.1  电压互感器     32
4.4.2  电压互感器的选择     33
4.4.3  电压互感器的校验     33
4.5    避雷器的选择     35
4.6  开关柜的选择     36
第5章 变电站继电保护     37
结论     38
参考文献     39
致谢     40
附录Ⅰ 电气主接线图     41
 

推荐资料